Search this catalogue
 [?]
 [?]
 [?]
 [?]
print this page

Catalog entry

inv. 440
View of Newburyport from Salisbury
From Salisbury; View of Newburyport; View of Newburyport (from Salisbury); View of Newburyport, (From Salisbury)
1845
Lithograph on paper
15 1/2 x 24 7/8 in. (39.4 x 63.2 cm)
Signed lower center: View of Newburyport (from Salisbury), F.H. Lane, Del. from a sketch by A.Conant/ Lane & Scott's Lith., 16 Tremont Temple, Boston

Commentary

This lithograph was published by Albert Conant, who also made the original sketch. Lane transferred that sketch to the lithographic stone, and the lithograph was printed by Lane & Scott.

 

This view is based on a drawing by Albert Conant and portrays the center of Newburyport from across the Merrimac River at a landing in Salisbury. Looking southwesterly, the center of view lies between the domed steeple of the Harris Street Church (left) and the lofty spire of the Pleasant Street Church (right). Here is a seaport at its zenith, with several busy shipyards at the city’s west end (not seen), while the prominently displayed business district is dominated by coastal, foreign, and inland (by river) trade (1).

Away from the river, manufacturing was a growing economic presence, initiated by fine woodwork, silverware, and later textiles. This was to dwindle along with shipbuilding and maritime trade as railroads and canals drew industries to Boston and away from surrounding cities. At the time of Conant’s visit, Newburyport’s fortunes were still on the rise with another four decades to come before its shipbuilding industry came to an end (2).

The Salisbury shoreline in the foreground is no less interesting than the city across the river. The piles of milled barrel staves and a partially assembled cask are indicative of a very busy cooperage serving a very active trade in rum and molasses on the far side of the river. The neatly bundled and stacked staves are of varying lengths suitable for different sizes of barrels, casks, and kegs, examples of which can be seen on the grass at right of center.

In drawing the images on stone, Lane no doubt trusted the accuracy of Conant’s depictions of buildings and the city’s skyline. In the vessels, however, we see Lane’s hand in the accuracy of ships’ hull forms, rigging, and above all the sails. Note the packet sloop in the right foreground, its sails partially hoisted to dry, the patches in the main sail’s peak, and the shadows of the folds in both sails.

Lane was working in partnership with John W. A. Scott when he rendered Conant’s drawing on stone, but the printed work – also produced by Lane and Scott – was published by Conant.

–Erik Ronnberg

 

References:

1. Robert K. Cheney, “Maritime History of the Merrimac – Shipbuilding” (Newburyport, MA: Newburyport Press, Inc., 1964).

2. Editor Claude M. Fuess, “The Story of Essex County” (New York, NY: The American Historical Society, Inc., 1935). Vol. I, Chapter IX: “Ships and Shipping,” by Robert K. Vietor; Vol. I, Chapter XI: “Later Industries,” by Robert K. Vietor.

[+] See More

Supplementary Images

Viewpoint map showing direction and angle of view. From U.S. Coast survey chart of Newburyport Harbor.
 

Explore catalog entries by keywords view all keywords »

Subject Types:   Harbor Scene »   //   Townscape »
Landscape Types:   River »
Vessel Types:   Brig »   //   Brig (Half) »   //   Schooner »   //   Sloop »   //   Steamship »
Vessel Activites:   At Wharf »
Massachusetts Locales:   Newburyport »
Activities of People:   Rowing »
Objects:   Barrel »
Building Types:   Commercial Building »

Historical Materials
Below is historical information related to the Lane work above. To see complete information on a subject on the Historical Materials page, click on the subject name (in bold and underlined).

[ top]
Other Locales: Newburyport, Mass.

Newburyport is a coastal town, located north of Boston and just south of the Massachusetts–New Hampshire border. It is located on the south bank of the Merrimack river, between the river and the Newbury marshes. Like many other seaports, in the nineteenth century it had a fishing fleet as well as a prosperous shipbuilding industry. Distilleries around the waterfront produced rum from the molasses brought back from the West Indies by local captains. In addition, it was the site of ferries used by the the Portsmouth Flying Stage Coach running between Portsmouth, New Hampshire and Boston.

[ top]
Vessel Types: Bark / Barkentine or Demi-Bark
[Related to impression: The New York Public Library (inv. 499)]

In the ninteenth century, the term "bark" was applied to a large sailing vessel having three masts, the first two (fore and main) being square-rigged; the third (mizzen), fore-and-aft rigged. The reduced square-rig made the vessel easier and more economical to handle, using a smaller crew. (1)

Barks had significant presence in mid-nineteenth-century America, as indicated by Lane’s depictions of them. Hardly any are to be found in his scenes of major ports, but some do appear in his Cape Ann scenes (see The Fort and Ten Pound Island, Gloucester (Harbor Scene), 1848 (inv. 58), View of Gloucester, 1859 (inv. 91), Gloucester Harbor, 1850s (inv. 391), and Bark "Eastern Star" of Boston, 1853 (not published)), also in views of other small ports and of coastal shipping (see Clipper Ship "Southern Cross" in Boston Harbor, 1851 (inv. 253), Merchantmen Off Boston Harbor, 1853 (inv. 267), Approaching Storm, Owl's Head, 1860 (not published), and Bark "Mary" (inv. 629)).

Brigs, and to a lesser extent ships, were the vessels of choice for Gloucester’s foreign trade in the first half of the nineteenth century. They brought cargos from the West Indies, South America, and Europe, anchoring in the deeper parts of the Inner Harbor while lighters off-loaded the goods and landed them at the wharves in Harbor Cove, by then too shallow for the newer, larger merchant vessels coming into use. (2) By mid-century, barks were gradually replacing brigs and ships, while the trade with Surinam was removed to Boston in 1860. (3)

Some bulk cargos still had to be landed in Gloucester, salt for curing fish being the most important. “Salt barks” brought Tortugas salt from the West Indies, and in the 1870s, Italian salt barks began bringing Trapani salt from Sicily. The importation of salt by sailing ships ended with the outbreak of World War I. (4)

The term barkentine, like the bark, pre-dates the nineteenth century, but in the mid- to late 1800s referred to a large vessel of three masts (or more), with only the fore mast square-rigged, the others being fore-and-aft-rigged. In Lane’s time, the term was little known in the United States, while many other names were coined for the rig. One of these early terms was demi-bark, probably from the French demi-barque, which was applied to a very different kind of vessel. (5) Lane’s depictions of these rigs include a lithograph of the steam demi-bark "Antelope" View of Newburyport, (From Salisbury), 1845 (inv. 499) and at least three depictions of Cunard steamships The "Britannia" Entering Boston Harbor, 1848 (inv. 49), Cunard Steamship Entering Boston Harbor (inv. 197), and Cunard Liner "Britannia", 1842 (inv. 259). (6) None of these subjects typify the barkentine rig as applied to sails-only rigs as they developed in the years after Lane’s death.

– Erik Ronnberg (May, 2015)

References:

1. R[ichard] H[enry] Dana, Jr., The Seaman's Friend (Boston; Thomas Groom & Co., 1841. 13th ed., 1873), 97 and Plate IV with captions; and M.H. Parry, et al., Aak to Zumbra: A Dictionary of the World's Watercraft (Newport News, VA: The Mariners’ Museum, 2000), 43.

2. Alfred Mansfield Brooks, Gloucester Recollected (Gloucester, MA: Peter Smith, 1974), 56, note 10; 67, note 7.

3. James R. Pringle, History of the Town and City of Gloucester (1892. Reprint: Gloucester, MA, 1997), 106–08.

4. Raymond McFarland, A History of the New England Fisheries (Philadelphia: University of Pennsylvania, 1911), 95–96; and Mark Kurlansky, Salt: A World History (New York: Walker & Co., 2002), 419–420.

5. Parry, 44, 167. Dana has neither definition nor illustration of this rig.

6. J[ohn] W. Griffiths, “The Japan and China Propeller Antelope," U.S. Nautical Magazine III (October 1855): 11–17. This article includes an impression of Lane’s lithograph on folded tissue.

photo (historical)
Photo of Bark
[+]
illustration
Barkentine
1885
Engraving in Merchant Vessels of the Unite States (Washington, DC: Government Printing Office, 1885)

See fig. XX.

[+]
artwork
The Fort and Ten Pound Island, Gloucester (Harbor Scene)
Fitz Henry Lane
1848
Oil on canvas
20 x 30 in.
Newark Museum, N.J., Gift of Mrs. Chant Owen, 1959 (59.87)

Detail of harbor scene.

[+]
photo (historical)
Cape Ann Scenery: No. 44 Gloucester Harbor
John S. E. Rogers, Publisher
c.1875
Stereograph card
Cape Ann Museum Library & Archive

This view of Gloucester's Inner Harbor shows three square-rigged vessels in the salt trade at anchor. The one at left is a (full-rigged) ship; the other two are barks. By the nature of their cargos, they were known as "salt ships" and "salt barks" respectively. Due to their draft (too deep to unload at wharfside) they were partially unloaded at anchor by "lighters" before being brought to the wharves for final unloading.

– Erik Ronnberg

[+]
illustration
Bark
Engraving in R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

A bark is square-rigged at her fore and main masts, and differs from a ship in having no top, and carrying only fore-and-aft sails at her mizzenmast. 

[+]
artwork
Silhouettes of vessel types
Charles G. Davis
Book illustrations from "Shipping and Craft in Silhouette" by Charles G. Davis, Salem, Mass. Marine Research Society, 1929. Selected images
[+]
[ top]

In general, brigs were small to medium size merchant vessels, generally ranging between 80 and 120 feet in hull length. Their hull forms ranged from sharp-ended (for greater speed; see Brig "Antelope" in Boston Harbor, 1863 (inv. 43)) to “kettle-bottom” (a contemporary term for full-ended with wide hull bottom for maximum cargo capacity; see Ships in Ice off Ten Pound Island, Gloucester, 1850s (inv. 44) and Boston Harbor, c. 1850 (inv. 48)). The former were widely used in the packet trade (coastwise or transoceanic); the latter were bulk-carriers designed for long passages on regular routes. (1) This rig was favored by Gloucester merchants in the Surinam Trade, which led to vessels so-rigged being referred to by recent historians as Surinam brigs (see Brig "Cadet" in Gloucester Harbor, late 1840s (inv. 13) and Gloucester Harbor (not published)). (2)

Brigs are two-masted square-rigged vessels which fall into three categories:

Full-rigged brigs—simply called brigs—were fully square-rigged on both masts. A sub-type—called a snow—had a trysail mast on the aft side of the lower main mast, on which the spanker, with its gaff and boom, was set. (3)

Brigantines were square-rigged on the fore mast, but set only square topsails on the main mast. This type was rarely seen in America in Lane’s time, but was still used for some naval vessels and European merchant vessels. The term is commonly misapplied to hermaphrodite brigs. (4)

Hermaphrodite brigs—more commonly called half-brigs by American seamen and merchants—were square-rigged only on the fore mast, the main mast being rigged with a spanker and a gaff-topsail. Staysails were often set between the fore and main masts, there being no gaff-rigged sail on the fore mast.

– Erik Ronnberg

References:

1. Howard I. Chapelle, The National Watercraft Collection (Washington, DC: Smithsonian Institution, 1960), 64–68.

2. Alfred Mansfield Brooks, Gloucester Recollected: A Familiar History (Gloucester, MA: Peter Smith, 1974), 62–74. A candid and witty view of Gloucester’s Surinam Trade, which employed brigs and barks.

3. R[ichard] H[enry] Dana, Jr., The Seaman's Friend (Boston: Thomas Groom & Co., 1841. 13th ed., 1873), 100 and Plate 4 and captions; and M.H. Parry, et al., Aak to Zumbra: A Dictionary of the World's Watercraft (Newport News, VA: The Mariners’ Museum, 2000), 95.

4. Parry, 95, see Definition 1.

artwork
Brig "Cadet" in Gloucester Harbor
Fitz Henry Lane
late 1840s
Oil on canvas
17 1/4 x 25 3/4 in.
Cape Ann Museum, Gloucester, Mass., Gift of Isabel Babson Lane, 1946 (1147.a)
Photo: Cape Ann Museum

Detail of brig "Cadet."

Also filed under: "Cadet" (Brig) »

[+]
chart
Chart showing the voyage of the brig Cadet
c.1980
Painting on board
72 x 48 in.
Collection of Erik Ronnberg

Chart showing the voyage of the brig Cadet to Surinam and return, March 10–June 11, 1840.

Image: Erik Ronnberg

Also filed under: "Cadet" (Brig) »   //  Surinam Trade »

[+]
illustration
Full-rigged Brig
Engraving in R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

Detail of a full-rigged brig is square-rigged at both her masts. 

[+]
artwork
Silhouettes of vessel types
Charles G. Davis
Book illustrations from "Shipping and Craft in Silhouette" by Charles G. Davis, Salem, Mass. Marine Research Society, 1929. Selected images
[+]
[ top]

Hermaphrodite brigs—more commonly called half-brigs by American seamen and merchants—were square-rigged only on the fore mast, the main mast being rigged with a spanker and a gaff-topsail. Staysails were often set between the fore and main masts, there being no gaff-rigged sail on the fore mast. (1)

The half-brig was the most common brig type used in the coasting trade and appears often in Lane’s coastal and harbor scenes. The type was further identified by the cargo it carried, if it was conspicuously limited to a specialized trade. Lumber brigs (see Shipping in Down East Waters, 1854 (inv. 212) and View of Southwest Harbor, Maine: Entrance to Somes Sound, 1852 (not published)) and hay brigs (see Lighthouse at Camden, Maine, 1851 (inv. 320)) were recognizable by their conspicuous deck loads. Whaling brigs were easily distinguished by their whaleboats carried on side davits (see Ships in the Harbor (not published)). (2)

 – Erik Ronnberg

References:

1. M.H. Parry, et al., Aaak to Zumbra: A Dictionary of the World's Watercraft Newport News, VA: The Mariners’ Museum, 2000), 268, 274; and A Naval Encyclopaedia (L.R. Hamersly & Co., 1884. Reprint: Detroit, MI: Gale Research Company, 1971), 93, under "Brig-schooner."

2. W.H. Bunting, An Eye for the Coast (Gardiner, ME: Tilbury House: 1998), 52–54, 68–69; and W.H. Bunting, A Day's Work, part 1 (Gardiner, ME: Tilbury House: 1997), 52.

Related tables: Brig »
photo (historical)
Canadian Brig "Ohio" in East Gloucester
c.1910
Photograph

Canadian brig "Ohio" iced in off Reed & Gamage Wharf, East Gloucester.

[+]
photo (historical)
A half brig being towed to the Bay in New York Harbor
George Stacy
1859–60
Photograph
Johnson, H. and Lightfoot, F.S.: Maritime New York in Nineteenth-Century Photographs, Dover Publications, Inc., New York
[+]
illustration
Hermaphrodite Brig
Engraving in R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

An hermaphrodite brig is square-rigged at her foremast; but has no top, and only fore-and-aft sails at her main mast.

[+]
artwork
Lumber Brig in High Seas
Fitz Henry Lane
n.d.
Oil on canvas
10 1/8 x 16 in.
Cape Ann Museum, Gloucester, Mass., Gift of the Estate of Anne K. Garland, 1990 (2676.00)

Detail of lumber brig.

[+]
artwork
Silhouettes of vessel types
Charles G. Davis
Book illustrations from "Shipping and Craft in Silhouette" by Charles G. Davis, Salem, Mass. Marine Research Society, 1929. Selected images
[+]
[ top]

Schooners in Lane’s time were, with few exceptions, two-masted vessels carrying a fore-and-aft rig having one or two jibs, a fore staysail, gaff-rigged fore- and main sails, and often fore- and main topsails. One variant was the topsail schooner, which set a square topsail on the fore topmast. The hulls of both types were basically similar, their rigs having been chosen for sailing close to the wind. This was an advantage in the coastal trade, where entering confined ports required sailing into the wind and frequent tacking. The square topsail proved useful on longer coastwise voyages, the topsail providing a steadier motion in offshore swells, reducing wear and tear on canvas from the slatting of the fore-and-aft sails. (1)

Schooners of the types portrayed by Lane varied in size from 70 to 100 feet on deck. Their weight was never determined, and the term “tonnage” was a figure derived from a formula which assigned an approximation of hull volume for purposes of imposing duties (port taxes) on cargoes and other official levies. (2)

Crews of smaller schooners numbered three or four men. Larger schooners might carry four to six if a lengthy voyage was planned. The relative simplicity of the rig made sail handling much easier than on a square-rigged vessel. Schooner captains often owned shares in their vessels, but most schooners were majority-owned by land-based firms or by individuals who had the time and business connections to manage the tasks of acquiring and distributing the goods to be carried. (3)

Many schooners were informally “classified” by the nature of their work or the cargoes they carried, the terminology coined by their owners, agents, and crews—even sometimes by casual bystanders. In Lane’s lifetime, the following terms were commonly used for the schooner types he portrayed:

Coasting schooners: This is the most general term, applied to any merchant schooner carrying cargo from one coastal port to another along the United States coast (see Bar Island and Mt. Desert Mountains from Somes Settlement, 1850 (not published), right foreground). (4)

Packet schooners: Like packet sloops, these vessels carried passengers and various higher-value goods to and from specific ports on regular schedules. They were generally better-maintained and finished than schooners carrying bulk cargoes (see The Old Fort and Ten Pound Island, Gloucester, 1850s (inv. 30), center; and Gloucester Inner Harbor, 1850 (inv. 240), stern view). (5)

Lumber schooners: Built for the most common specialized trade of Lane’s time, they were fitted with bow ports for loading lumber in their holds (see View of Southwest Harbor, Maine: Entrance to Somes Sound, 1852 (not published)) and carried large deck loads as well (Stage Rocks and the Western Shore of Gloucester Outer Harbor, 1857 (inv. 8), right). Lumber schooners intended for long coastal trips were often rigged with square topsails on their fore masts (see Becalmed Off Halfway Rock, 1860 (inv. 344), left; Maverick House, 1835 (not published); and Lumber Schooner in a Gale (not published)). (6)

Schooners in other specialized trades. Some coasting schooners built for carrying varied cargoes would be used for, or converted to, special trades. This was true in the stone trade where stone schooners (like stone sloops) would be adapted for carrying stone from quarries to a coastal destination. A Lane depiction of a stone schooner is yet to be found. Marsh hay was a priority cargo for gundalows operating around salt marshes, and it is likely that some coasting schooners made a specialty of transporting this necessity for horses to urban ports which relied heavily on horses for transportation needs. Lane depicted at least two examples of hay schooners (see Gloucester Harbor, 1850s (inv. 391), left; and Coasting Schooner off Boon Island (not published)), their decks neatly piled high with bales of hay, well secured with rope and tarpaulins.

– Erik Ronnberg

References:

1. Howard I. Chapelle, The History of American Sailing Ships (New York: W.W. Norton & Co., 1935), 258. While three-masted schooners were in use in Lane’s time, none have appeared in his surviving work; and Charles S. Morgan, “New England Coasting Schooners”, The American Neptune 23, no. 1 (DATE): 5–9, from an article which deals mostly with later and larger schooner types.

2. John Lyman, “Register Tonnage and its Measurement”, The American Neptune V, nos. 3–4 (DATE). American tonnage laws in force in Lane’s lifetime are discussed in no. 3, pp. 226–27 and no. 4, p. 322.

3. Ship Registers of the District of Gloucester, Massachusetts, 1789–1875 (Salem, MA: The Essex Institute, 1944). Vessels whose shipping or fishing voyages included visits to foreign ports were required to register with the Federal Customs agent at their home port. While the vessel’s trade or work was unrecorded, their owners and master were listed, in addition to registry dimensions and place where built. Records kept by the National Archives can be consulted for information on specific voyages and ports visited.

4. Howard I. Chapelle, The National Watercraft Collection (Washington, DC: Smithsonian Institution, 1960), 40, 42–43.

5. Ibid., 42–43, 73.

6. Ibid., 74–76.

photo (historical)
Coasting schooner "Polly"
Photograph
[+]
Lumber schooner in Gloucester Harbor
1852
Photograph

Also filed under: Lumber Industry »

[+]
illustration
Topsail Schooner
In R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

A topsail schooner has no tops at her foremast, and is fore-and-aft rigged at her mainmast. She differs from an hermaphrodite brig in that she is not properly square-rigged at her foremast, having no top, and carrying a fore-and-aft foresail instead of a square foresail and a spencer.

[+]
object
1892 Gloucester Harbor Diorama (detail of marine railway)
Lawrence Jensen, Erik. A.R. Ronnberg, Jr.
Detail views: marine railway and hauling cradle for vessel
Wood rails, metal rollers, chain; wood cradle. Scale: ½" = 1' (1:24)
Original diorama components made, 1892; replacements made, 1993.
Cape Ann Museum, from Gloucester Chamber of Commerce, 1925 (2014.071)

A schooner is shown hauled out on a cradle which travels over racks of rollers on a wood and metal track.

[+]
photo (historical)
Lobsterman and dory at Lane's Cove
Photographer unknown
c. 1900
Glass plate negative
Collection of Erik Ronnberg

Also filed under: Lobstering »

[+]
PDF
view ]
publication
Maine Register for 1855 (Lumber)
George Adams, publisher
"The Maine Register for the Year 1855, embracing State and County Officers, and an abstract of the law and resolves; together with a complete business directory of the state, and a variety of useful information."

Details about Maine's lumber trade in 1855, see pp. 250–52

Also filed under: Castine »   //  Lumber Industry »

[+]
illustration
View of the Old Fort and Harbor 1837
Fitz Henry Lane, attr.
1860
In John J. Babson, History of the Town Gloucester (Gloucester, MA: Procter Brothers, 1860)
Cape Ann Museum Library & Archives, Gloucester, Mass.

See p. 474.

[+]
[ top]

The term "ship," as used by nineteenth-century merchants and seamen, referred to a large three-masted sailing vessel which was square-rigged on all three masts. (1) In that same period, sailing warships of the largest classes were also called ships, or more formally, ships of the line, their size qualifying them to engage the enemy in a line of battle. (2) In the second half of the nineteenth century, as sailing vessels were replaced by engine-powered vessels, the term ship was applied to any large vessel, regardless of propulsion or use. (3)

Ships were often further defined by their specialized uses or modifications, clipper ships and packet ships being the most noted examples. Built for speed, clipper ships were employed in carrying high-value or perishable goods over long distances. (4) Lane painted formal portraits of clipper ships for their owners, as well as generic examples for his port paintings. (5)

Packet ships were designed for carrying capacity which required some sacrifice in speed while still being able to make scheduled passages within a reasonable time frame between regular destinations. In the packet trade with European ports, mail, passengers, and bulk cargos such as cotton, textiles, and farm produce made the eastward passages. Mail, passengers (usually in much larger numbers), and finished wares were the usual cargos for return trips. (6) Lane depicted these vessels in portraits for their owners, and in his port scenes of Boston and New York Harbors.

Ships in specific trades were often identified by their cargos: salt ships which brought salt to Gloucester for curing dried fish; tea clippers in the China Trade; coffee ships in the West Indies and South American trades, and  cotton ships bringing cotton to mills in New England or to European ports.  Some trades were identified by the special destination of a ship’s regular voyages; hence Gloucester vessels in the trade with Surinam were identified as Surinam ships (or barks, or brigs, depending on their rigs). In Lane’s Gloucester Harbor scenes, there are likely (though not identifiable) examples of Surinam ships, but only the ship "California" in his depiction of the Burnham marine railway in Gloucester (see Three Master on the Gloucester Railways, 1857 (inv. 29)) is so identified. (7)

– Erik Ronnberg

References:

1. R[ichard)] H[enry] Dana, Jr., The Seaman’s Friend, 13th ed. (Boston: Thomas Groom & Co., 1873), p. 121 and Plate IV with captions.

2. A Naval Encyclopaedia (Philadelphia: L. R. Hamersly & Co., 1884), 739, 741.

3.  M.H. Parry, et al., Aak to Zumbra: A Dictionary of the World’s Watercraft (Newport News, VA: The Mariners’ Museum, 2000), 536.

4. Howard I. Chapelle, The History of American Sailing Ships (New York: W.W. Norton & Co., 1935), 281–87.

5. Ibid.

6. Howard I. Chapelle, The National Watercraft Collection (Washington, DC: Smithsonian Institution, 1960), 26–30.

7. Alfred Mansfield Brooks, Gloucester Recollected: A Familiar History (Gloucester, MA: Peter Smith, 1974), 67–69.

Golden State
1884
Photograph
From American Clipper Ships 1833–1858, by Octavius T. Howe and Frederick C. Matthews, vol. 1 (Salem, MA: Marine Research Society, 1926).

Photo caption reads: "'Golden State' 1363 tons, built at New York, in 1852. From a photograph showing her in dock at Quebec in 1884."

[+]
photo (current)
"Friendship of Salem"
Built in 1998

A replica of an early nineteenth-century full-rigged ship.

[+]
artwork
Homeward Bound
c.1865
Hand-colored lithograph
Published by N. Currier, New York
Library of Congress (2002695891)
[+]
illustration
Ship
1885
Engraving from Merchant Vessels of the United States (Washington, DC: Government Printing Office)

Engraving of ship.

[+]
artwork
Packet "Nonantum" Riding out a Gale
Samuel Walters
1842
Oil on canvas
24 x 35 in.
Peabody Essex Museum, Salem, Mass.

Walters' painting depicts the "Nonantum" homeward bound for Boston from Liverpool in 1842. The paddle-steamer is one of the four Clyde-built Britannia-class vessels, of which one is visible crossing in the opposite direction.

Image: Peabody Essex Museum
[+]
illustration
Ship
Engraving in R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

A ship is square-rigged throughout; that is, she has tops, and carries square sails on all three of her masts.

[+]
artwork
Silhouettes of vessel types
Charles G. Davis
Book illustrations from "Shipping and Craft in Silhouette" by Charles G. Davis, Salem, Mass. Marine Research Society, 1929. Selected images
[+]
[ top]

Sloops are one-masted sailing vessels which, in American examples, set fore-and-aft sails but usually no square sails. Thus, staysails, or jibs, are set from the fore stay(s) and a quadrilateral mainsail is set from the mast and spread by a gaff and a boom. The larger sloops would often set a triangular topsail over the main sail. (1)

The sloops depicted by Lane were used in various coastal trades, each with its own requirements, which dictated the sizes and details of their hulls and rigs. Most elegant were the packet sloops, which transported passengers, mail, and higher value goods between specific ports on regular schedules. They usually measured between sixty and seventy-five feet on deck, as dictated by anticipated shipping volume. Finely finished, they usually had stern galleries—a row of windows across the transom with ornamental moldings—and varied color schemes. Examples of packet sloops are in Gloucester Harbor from Rocky Neck, 1844 (inv. 14) (center, middle ground) and Study of Ships, 1851 (inv. 141) (foreground), both of which probably made trips between Gloucester and Boston, or Gloucester and Newburyport. (2)

Another specialized sloop of similar size was the stone sloop, used to ship granite blocks from stone-loading piers around Cape Ann to other ports. They were similar in rig to packet sloops, but of heavier construction with greater hold capacity and absence of decoration. Their stout appearance was augmented by simple color schemes, or even tarred topsides, reflecting the wear and strain imposed by their heavy cargos. Lane depicted these vessels in his painting of Fresh Water Cove from Dolliver's Neck, Gloucester, Early 1850s (inv. 45), with a sloop (at left) preparing to load at wharf-side, and another (at right) sailing out with a cargo. (3)

Sloops of the more work-a-day sort are the most commonly seen examples in Lane’s paintings, most of them appearing in his views of Boston Harbor. Usually deep-loaded and looking weather-worn, they contrast sharply with the packet- and clipper ships which dominate the scene. Sloops of this type are rarely seen in Lane’s paintings of Gloucester Harbor and the Maine coast, although they were certainly needed for short-distance transportation (see Bear Island, Northeast Harbor, 1855 (inv. 24), View of Camden Mountains from Penobscot Bay, c.1852 (inv. 207), Sunrise on the Maine Coast, Mount Desert Island, 1856 (not published)). For coastal Maine, lack of railroads for heavier freight and greater distances between ports made the use of schooners with larger carrying capacity a greater necessity. (4)

In Lane’s views of New York Harbor, a regional sloop variant, the Hudson River Sloop, appears in New York Harbor, c.1855 (inv. 46) (bow view, left) and A Calm Sea, c.1860 (inv. 6) (stern view, right). This type had become prominent in the Hudson River packet trade between New York City, Albany, and beyond to points north and west as far as the eastern terminus of the Erie Canal.  Large vessels for their rigs, they were well-finished and well-kept, reflecting pride of ownership and rivalry among their owners and crews. (5)

– Erik Ronnberg

References:

1. A Naval Encyclopaedia (Philadelphia: L.R. Hamersly & Co., 1884. Reprint: Detroit, MI: Gale Research Company, 1971), 59.  See first definition of "sloop" and definition of "sloop-rigged."

2. Robert Greenhalgh Albion, William A. Baker, and Benjamin Woods Labaree, New England and the Sea (Mystic, CT: Mystic Seaport Museum, 1972; reprinted in 1994), 127–28.

3. Howard I. Chapelle, The History of American Sailing Ships (New York: W.W. Norton & Co., 1935), 300–02.

4. Ibid., 300.

5. Ibid., 298–300.

illustration
Sloop
Engraving in R. H. Dana, The Seaman's Friend, 13th ed. (Thomas Groom & Co. Publisher, 1873)

A sloop has one mast, fore-and-aft rigged.

[+]
publication
Bermudian sloop
1884
A Naval Encyclopaedia:
Dictionary of nautical words and phrases
Special Articles on Naval Art and Science
Philadelphia: L.R. Hamersly & Co.

'Mudian, "Mugian, or Bermudian. A boat special to the Bermuda islands, usually decked, with the exception of a hatch; from 2 to 20 tons burden; it is short, of good beam, and great draft of water abaft, the stem and keel forming a curved line. It carries an immense quantity of ballast. Besides a long main- and short jib-boom, it has a long, taperking, raking mast, stepped just over the forefoot, generally unsupported by shrouds or stays; on it a jib-headed mainsail is hoisted to a height of twice, and sometimes three times, the length of the keel. This sail is triangular, stretched at its foot by a long boom. The only other sail is a small foresail or jib. They claim to be the fastest craft in the world for working to windward in smooth water, it being recorded of one that she made five miles dead to windward in the hour during a race; and though they may be laid over until they fill with water, they will not capsize.

[+]
artwork
Bermudian sloop in St. Georges Harbor, Bermuda
Edward James
c. 1864
St. George's Historical Society
Detail of painting of St. George's Harbour, Bermuda, during US Civil War, with a Confederate blockade runner anchored in the foreground.

Also filed under: Puerto Rico »

[+]
object
Scale model of stone sloop "Albert Baldwin"
William Niemi
c.1940
Wood, metal, cordage, cloth, paint.
Scale: ¼ in. = 1ft. (1:48)
Cape Ann Museum. Gift of Roland and Martta Blanchet (1997.17.3)

Although built in 1890 and larger than the stone sloops of Lane’s time, the "Albert Baldwin’s" hull form, rig, and loading boom are very similar to those of the 1840s and 1850s.

[+]
artwork
Silhouettes of vessel types
Charles G. Davis
Book illustrations from "Shipping and Craft in Silhouette" by Charles G. Davis, Salem, Mass. Marine Research Society, 1929. Selected images
[+]
[ top]

"Engine-powered vessel" is a collective term used by nautical historians to include all vessel types using engine power of any type for propulsion, whether assisted by sails, oars, or other motive power. In Lane's time, steam reciprocating engines fueled by wood or coal were the only practical source of this power for ships using paddle-wheels or screw propellers to convert heat energy into motion.

For most of the nineteenth century, steamships had sails for auxiliary power; indeed the earliest examples relied principally on sails, using engine power in calm weather to shorten the voyage time or keep to a schedule. As engines became more efficient, powerful, and reliable, sail plans were reduced, to be used only to steady a vessel's motion in a seaway (for the sake of seasick passengers), or to maintain headway if the engine broke down. Only harbor craft, ferry boats, and coastwise passenger steamers relied solely on engine power.

Among Lane's depictions of steamships, the auxiliary steam packet Auxiliary Steam Packet Ship Massachusetts (inv. 442) is a good example of primary reliance on sails, while the steam demi-bark The "Britannia" Entering Boston Harbor, 1848 (inv. 49) and the Cunard Liner "Britannia", 1842 (inv. 259) have relegated sails to secondary (or simply emergency) motive power.

– Erik Ronnberg

artwork
Boston Harbor (detail of steamship)
Fitz Henry Lane
Boston Harbor
1856
Oil on canvas
25 1/2 x 42 1/2 in. (64.8 x 108 cm)
Dated verso: 1856
Amon Carter Museum of American Art, Fort Worth, Tex. (1977.14)
[+]
Steamer Lewiston, at the Wharf, Castine
George E. Collins
Stereograph card
Castine Historical Society Collections (2015.03)

Also filed under: Historic Photographs »   //  Steamers »

[+]
model
Harbor ferry "Little Giant"
John Gardner Weld
early 20th century
Wood and metal
Cape Ann Museum (1200)
Image: Erik Ronnberg
[+]
publication
Boston Directory
George Adams
1848
Published by James French, Boston
Volume 1848-49
Boston Public Library
Call number 39999059856813

See p. 30 of directory.

Image: Boston Public Library
[+]
illustration
Bound to Beat
Serrell & Perkins, Printer and Publisher
c.1851
Cartoon
9 1/4 x 13 3/4 in (23.495 x 34.925 cm)
Peabody Essex Museum, Salem, Mass.

Jonny and a Yankee:

Jonny: "Ho my Hi! 'ow she goes!! it his'nt fair I ham sure t'aint!!! She must 'av an engine hunder the keel..."

Yankee: "Where are your yachts now, Jonny? s-a-y- Do you think your wash tubs can come up to a real Yankee Clipper? Sorry for you, Jonny, but it can't be helped... A Yankee Ship a Yankee Crew, you know Jonny."

Image: Peabody Essex Museum
[+]
Patent drawings for paddle wheel steamer
1842
Lithograph
Library of Congress Catalog Number 2002706878

Design of side wheel steamer showing wheel mechanism, side view and cross-section in ten figures. This design proved a failure in the few vessels that employed it. The paddle wheel enclosures filled with water, causing resistance which greatly impaired efficiency and increased fuel consumption.

– Erik Ronnberg

[+]
artwork
"T.F. Secor" Passenger Steamship
Unknown
c. 1855
Oil on canvas
Maine Maritime Museum
Image: Maine Maritime Museum

Also filed under: Castine »

[+]
PDF
view ]
publication
The Maine Register for the Year 1855 (Steamer Schedule)
George Adams, publisher
"The Maine Register for the Year 1855, embracing State and County Officers, and an abstract of the law and resolves; together with a complete business directory of the state, and a variety of useful information."

Steamer schedules for 1855, including the schedule for the steamer, "T. F. Secor" which served Castine, see pp. 234–35.

Also filed under: "T. F. Secor" (Steamboat) »   //  Castine »   //  Publications »   //  Steamers »

[+]
[ top]

The timber trade played an important role in New England’s economy from Colonial days through the mid-19th century, supplying the vast quantities of lumber which a rapidly growing nation demanded.  While Cape Ann’s woodlands were depleted early on, timber continued to be harvested from northern New England and the Maritime Provinces right up to the Civil War.

With a deep and safe harbor, Gloucester often served as a layover spot where vessels bound from Maine to Boston, New York or Baltimore and heavily laden with lumber could ride out bad weather.  Because of this, Fitz Henry Lane’s paintings of Gloucester Harbor often show a schooner or a brig, loads of lumber clearly visible on their decks, sheltering along the Western Shore.

References:

Honey, Mark E., "King Pine, Queen Spruce, Jack Tar," An Intimate History of Lumbering on the Union River, Volumes 1-5. This source, in its entirety, lays down the foundation of Downeast Maine's unique culture which was built upon pine lumber and timber, the cod fisheries, coasting, shipbuilding, and the interrelationships of family and community.

Lumber schooner in Gloucester Harbor
1852
Photograph
[+]
Bangor Log Raft
Advertisement for The Bangor News Company, est. January 31, 1881
Castine Historical Society Collections (2008.02)

Also filed under: Historic Photographs »

[+]
PDF
view ]
publication
Maine Register for 1855 (Lumber)
George Adams, publisher
"The Maine Register for the Year 1855, embracing State and County Officers, and an abstract of the law and resolves; together with a complete business directory of the state, and a variety of useful information."

Details about Maine's lumber trade in 1855, see pp. 250–52

[+]
[ top]

Lane & Scott's Lithography was a Boston-based firm formed by Fitz Henry Lane and John W. A. Scott. The partnership spanned 1844–48, after both artists had apprenticed for prominent Boston lithographer, William Pendleton. The firm was located at 16 Tremont Temple, Boston and created sheet music covers, book illustrations, advertisements, prints, and town views. Lane left the firm around 1847 or 1848 and Scott printed some works under his own name.

This information has been summarized from Boston Lithography 1825–1880 by Sally Pierce and Catharina Slautterback. 

map
1837 plan of the City of Boston
Charles Stimpson
1837
9 x 14 in.
Cape Ann Museum Library & Archive

Showing Lane's neighborhood while working in Boston. Lane had studios at the intersection of Washington and State Streets, Summer, Tremont and School Streets.

Also filed under: Boston City Views »   //  Maps »   //  Professional »   //  Residences »   //  Tremont Temple »

[+]
map
A Map of Plymouth Village
Lane & Scott Lith.
Frontispiece of " Pilgrim memorials, and guide for visitors to Plymouth Village: : with a lithographic map, and seven copperplate engravings." / By Wm. S. Russell, recording secretary of the Pilgrim Society. ; [Eight lines from Oliver Wendell Holmes]
Boston: : Printed for the author, by C.C.P. Moody, Old Dickinson Office–52 Washington Street., 1851
Courtesy of the American Antiquarian Society, Worcester.
Call Number LML Plym Russ P851

American Antiquarian Society copy of book inscribed: Belonging to J.G. Orton. Bought in Pilgrim Hall Plymouth, Mass. Oct. 10th 1851

Map of Plymouth Village in 1846 signed: Lane & Scott's Lith., Boston

Image: American Antiquarian Society
[+]
publication
The Voyage of the "Jamestown" on her Errand of Mercy
Robert Bennet Forbes
1847
Boston
Eastburn's Press

Link to Google Books.

[+]
[ top]

Albert Conant was an artist, printer, publisher, and art teacher. From 1835 to 1850 he drew New England town views that were printed by J.H. Bufford, E.W.Bouvé, and John W.A. Scott was well as by Lane & Scott. He was possibly the same A. Conant whose views of Kansas towns were lithographed by Middleton, Strowbridge & Co. of Cincinnati from 1857 to 1859. He was born in Pomfret, Vermont, on 6 July 1821 and died in Boston on 22 February 1883. 

This information has been summarized from Boston Lithography 1825–1880 by Sally Pierce and Catharina Slautterback. 

Provenance (Information known to date; research ongoing.)

See IMPRESSIONS tab for provenance.

Exhibition History

1966 DeCordova Museum: DeCordova Museum, Lincoln, Massachusetts, Fitz Hugh Lane: The First Major Exhibition, no. 75. [Impression: The Mariners' Museum (inv. 415)].
2017–18 Cape Ann Museum: Cape Ann Museum, Gloucester, Massachusetts, Drawn From Nature & on Stone: The Lithographs of Fitz Henry Lane [Impression: Boston Athenaeum (inv. 518)].

Published References

Stokes and Haskell 1932: American Historical Prints: Early Views of American Cities, Etc. from the Phelps Stokes and Other Collections, text p.163. [Impression: The New York Public Library (inv. 499)].
American Prints 1933: American Historical Prints, p. 99. [Impression: The Mariners' Museum (inv. 415)].
Wilmerding 1963: "The Lithographs of Fitz Hugh Lane," p. 37.
Wilmerding 1966a: Fitz Hugh Lane: The First Major Exhibition, no. 75. [Impression: The Mariners' Museum (inv. 415)]. ⇒ includes text
Reps 1984: Views and Viewmakers of Urban America: Lithographs of Towns and Cities in the United States and Canada, Notes on the Artists and Publishers, and a Union Catalog of their Work,1825-1925, no. 1557, p.340.
Cape Ann Museum 2017: Drawn from Nature & on Stone: the Lithographs of Fitz Henry Lane, fig. 53, text, p. 30, as View of Newburyport (from Salisbury). [Impression: Boston Athenaeum (inv. 518)]. ⇒ includes text

Impression information

Boston Athenaeum (inv. 518)

enlarge
Photo: Boston Athenaeum (inv. 518)
View of Newburyport (from Salisbury)
Printed under image from left to right: F.H. Lane del., from a sketch by A. Conant. Lane & Scott's Lith., 16 Tremont Temple, Boston.
Boston Athenaeum, Gift of Charles E. Mason, Jr., 1980 (1980.61a)
On view at the Cape Ann Museum

The Mariners' Museum (inv. 415)

no image available
Signed lower center: View of Newburyport (from Salisbury), F.H. Lane, Del. from a sketch by A.Conant/ Lane & Scott's Lith., 16 Tremont Temple, Boston.
Courtesy of The Mariners' Museum, Newport News, Virginia (1934.1173.000001 / LP 0011)

The New York Public Library (inv. 499)

enlarge
Photo: New York Public Library (inv. 499)
View of Newburyport, (From Salisbury)
The New York Public Library, Gift of I.N. Phelps Stokes (110182)

Peabody Essex Museum (inv. 665)

no image available
View of Newburyport (from Salisbury)
Printed under image from left to right: F.H. Lane del., from a sketch by A. Conant. Lane & Scott's Lith., 16 Tremont Temple, Boston.
Peabody Essex Museum, Salem, Mass., Gift of Bostonian Society (M9511)

Yale University Art Gallery (inv. 283)

enlarge
Photo: Yale University Art Gallery (inv. 283)
View of Newburyport (from Salisbury)
Printed under image from left to right: F.H. Lane del., from a sketch by A. Conant. Lane & Scott's Lith., 16 Tremont Temple, Boston.; printed lower center: VIEW OF NEWBURYPORT / (FROM SALISBURY.) / Published by A. Conant.
Yale University Art Gallery, New Haven, Conn., Mabel Brady Garvan Collection (1946.9.1884)
Citation: "View of Newburyport from Salisbury, 1845 (inv. 440)." Fitz Henry Lane Online. Cape Ann Museum. http://fitzhenrylaneonline.org/catalog/entry.php?id=440 (accessed November 24, 2017).
Record last updated April 11, 2017. Please note that the information on this and all pages is periodically reviewed and subject to change.
Please share your knowledge with us: click here to leave feedback.