Search this catalogue
 [?]
 [?]
 [?]
 [?]

Historical Materials

Historical Materials  »  19th-Century Documentation  »  Objects

Objects

object
Bait mill
Manufacturer unknown
Wood and metal
Mid-19th century
Base: 15" square Top: 15" x 19" Height: 36"
Gift of Capt. Ben Pine, 1946
Cape Ann Museum, Accession No. 1157

A hand-powered mill for grinding small bait fish (herring) into small bits called chum, which was kept in a chum box lashed to the side of the schooner amidships, on the starboard side, where the crew fished from the rail. As the mackerel  swam under the schooner, chum would be tossed from the box with a large spoon in a process called tolling. If hungry, the mackerel would bite at the chum - and at fishing lines with mackerel jigs - in a feeding frenzy.

E.R.

Also filed under: Mackerel Fishing »

object
Ballast cart
unknown
Wood. Iron hardware and wheel rims.
12' 5"l. x 7' I" w. x 4' 9" h.
19th and early 20th c.
Cape Ann Museum. Gift of Thomas A. Robinson, 1983 (2344)

While heavily constructed to transport ballast stone from local beaches, this style of cart was used for many purposes. It is otherwise identical in design to horse-drawn carts depicted in Lane’s paintings.

Billet head
Unknown
1855
Carved wood with paint and gilt
12 x 22 x 8 in.
Cape Ann Museum. Gift of George W. Woodbury, 1936 (747)

This sea serpent billet head came from the schooner "Diadem" which was built in Essex, Massachusetts, in 1855 and owned by D. Elwell Woodbury and John H. Welsh of Gloucester.

Sea serpents were reportedly sighted here on Cape Ann from colonial times through the mid-nineteenth century. In 1817, more than 50 people, many of them prominent members of the community, reported seeing a serpent in the waters of Gloucester Harbor just off Pavilion Beach. So credible were the reports that the Linnaean Society of New England collected depositions from witnesses and published their findings in a small pamphlet entitled Report of a Committee of the Linnaean Society of New England relative to a Large Marine Animal Supposed to be A Serpent, seen Near Cape Ann, Massachusetts, in August 1817.

object
Deadeye
Iron and lignum vitae
Cape Ann Museum. Gift of Erik A.R. Ronnberg (2507.63)

A deadeye is a round block with scored holes for lanyards used to set tension on shrouds and stays. The upper deadeye is seized into an eye in the shroud or stay. The lower deadeye is fitted with a forged iron strap which is bolted to a chain plate fastened to the ship's hull.

object
First Order Fresnel Lens for Thacher Island lighthouse beacon
L. Sautter & Sons, Paris, France
c.1860
288 individual prisms are mounted in a brass frame, the whole structure measuring 9 ft. 4 in. high and 6 ft. 5" diameter.
Cape Ann Museum. On permanent loan from the United States Coast Guard, 2013

Installed in south light tower, 1861; removed, 1980.

object
Fish basket
maker unknown
early 20th century
Wood, wicker, cordage
19 1/2 x 23 in.
Cape Ann Museum (2089-3 G/O EARR)

Used at wharfside for carrying fish and small fishing gear.

object
Fourth Order Fresnel Lens for Eastern Point Light Beacon
Barbier, Renard and Turenne, Paris, France
mid-19th century
Four circular glass prism lenses in a brass frame:
Lens diameters 19". Base 21" square x 19-1/2" high.
Cape Ann Museum. On permanent loan from the United States Coast Guard, 2013

When installed, the light source was fixed and the lens mount rotated.

object
Galamander model
1959
Painted wood
Scale: 1:16. Galamander shop, Vinalhaven, Maine.
Cape Ann Museum. Gift of Barbara Erkkila, 1997

In the nineteenth century granite was hauled from Cape Ann quarries on heavy carts called garymanders which were pulled by oxen or horses (known as "galamander" in Maine.) A boom rigged above the rear axle was used to hoist the stone so it could be held by chains beneath the wagon. The garymander oak wheels were eight feet high with iron rims made by a blacksmith.

object
Granite quarryman's and blacksmith's tools
Box of granite tools originally owned by Martin O'Hearn (1884–1944)
Cape Ann Museum (1994.65)

Oilcan originally owned by Frederickj "Rick" Larsen
Cape Ann Museum (1994.76.3)

Peen hammer originally owned by Johann Jacob Erkkila (1877–1939)
(Cape Ann Museum) 1994.76.23a

Heavy blacksmith's sledge owned by John Fuge (1873–1967)
Cape Ann Museum (1997.24.0)

Although from a later period, these tools are similar to tools used in Lane's time.

model
Joseph A. Proctor (Gloucester, MA) fisherman's dory
Wood
Gloucester, MA
4 x 33 1/2 x 7 1/4 in (10.16 x 85.09 x 18.415 cm)
Peabody Essex Museum
photo (current)
Killick (anchor)
19th century
Stone, oak wood and twine
Sandy Bay Historical Society and Museum, gift of Jack Lawson (1310)

A type of anchor used in dory fishing.

model
Model of the packet ship "Britannia"
Donald McNarry
Twentieth century
Ship model
50'/1"
M15732
Peabody Essex Museum
object
Rigger's ditty bag
Erik A. R. Ronnberg
c.1945
Cotton fabric, hemp cord, iron draw-ring and thimbles
Cape Ann Museum (2507.62)

Riggers' ditty bags held an assortment of tools and materials for use outside the loft (at wharfside, on board, or aloft). Such items might include fids (for splicing), light cordage for whipping, marline and spunyarn for serving and seizings, needles and thread for canvasing rigging line at fraying surfaces. The items were selected according to anticipated tasks.

– Erik Ronnberg, as explained by Erik Ronnberg, Sr.

object
Sail palm
early 20th century
Leather, rawhide, and steel
Cape Ann Museum (2726.2)

Worn on the hand to protect the palm when pushing a needle through tight-woven sailcloth. They eye of the needle sits in one of the dimples in the steel plate called the "eye."

object
Serving mallet with winder
c.1950
Steel and wood
31 in.
Cape Ann Museum. Gift of Erik A. R. Ronnberg, 1995 (2507.20)

A serving mallet is used to cover natural fiber rope with a wrapping of marline (or spun yarn). This covering would reduce chafe and keep water from getting into the cordage and causing rot. The marline would be applied with tar or tar would be added afterwards. This process would take place either in the rigging loft or on the vessel by a professional rigger. 

object
Tiller
1851
Wood
105 x 5 x 4 inches (266.7 x 12.7 x 10.16 cm)
Peabody Essex Museum

Tiller used in navigating the yacht "America" across the Atlantic in 1851.

object
Water bucket from ship "Boston"
Unknown
c.1830
Wood, brass, paint
9 1/2 h. x 11 3/4 diam. inches
Cape Ann Museum. Bequest of Marion Mansfield Patterson Livingston. (2012.27)

Salvaged from the burning wreck of the packet ship Boston which was lost at sea in 1830. This disaster was the subject of Lane’s earliest known watercolor painting.

object
Wheelbarrow
Unknown
Wood and iron for fastenings and other hardware
5' 11" l. x 28" h. x 23" w. Wheel 20" d.
19th–early 20th century
Cape Ann Museum. Gift of the Gloucester Fishermen's Museum (2542)

Used to move salt fish in a flake yard. Barrows of this type were commonly used to carry a wide variety of materials around the waterfront.

Citation: "Historical Materials." Fitz Henry Lane Online. Cape Ann Museum. http://fitzhenrylaneonline.org/historical_material/index.php?section=Objects (accessed March 23, 2017).
Please note that the information on this and all pages is periodically reviewed and subject to change.
Please share your knowledge with us: click here to leave feedback.